Products

The packaging of metal, plastic and other medical materials sterilized by steam autoclave or EO .

1.Non-toxic water-based ink,color change clear and stable display, no melt.

2.Three explosion-proof edge technology can effectively prevent rupture

3. Following Viedeo show how the products are produced

Verify that the sterilization conditions are met during the sterilization process, such as temperature, pressure, steam saturation, time and other sterilization factors

1.The color block changes obviously before and after sterilization, which is easy to identify

2.Water Water-based Ink , non-toxic , Environmentally friendly

3.The indicator color printed firmly , not melt and drop off during sterilization

Sealing of flexible packaging materials such as non-woven fabrics, and visually display whether items have been sterilized.

1.The color contrast is clear and obvious before and after sterilization

2.Marking on the tape is OK

3.Easy to tear, without leaving any residual glue

4.The indicating color block is printed firmly fall off during sterilization.

1. Easy to mark: Use a marker pen to make relevant records on the test card. Such as: equipment number, operator, date, result, etc., easy to tracing .

2.The color change indication is clear, using high-temperature steam ink, the display is clear and stable, and will not melt

Used in the measurement of the performance of the pre-vacuum pressure steam sterilizer