This device places the medical equipment to be cleaned on the cleaning rack inside the cleaning machine, heats the washing water that has been added with alkaline or neutral high-efficiency multi enzyme cleaning agents, and then uses a water pump to pressurize the washing water, spraying the washing hot water onto the medical equipment to be cleaned with high water pressure, achieving the goal of cleaning the surface of the item; Disinfect by adding glutaraldehyde or benzaldehyde disinfectant and rinsing with hot water above 90 ℃ in a circulating manner; After washing, use a fan to send hot air with a temperature exceeding 100 ℃ into the cleaning chamber to dry the cleaned medical equipment. This device has no dead corners in cleaning and disinfection, completely solving the problem of incomplete cleaning and disinfection
| Product Model | SQ-X360 |
| Product form | Fixed type |
| Outer box size | 950 * 825 * 2060 (length * width * height) |
| Cleaning compartment size | 627 * 595 * 980 (length * width * height) |
| Total volume | 350L |
| Power supply | AC380V/50Hz (3-phase, 1 neutral, 1 ground) |
| Power | 31kVA |
| Environmental temperature | 5 ℃~40 ℃ |
| Relative humidity | ≤ 80% |
| Atmospheric pressure range | 70kPa to 106kPa |
| Water supply pressure | 0.2MPa~0.5MPa |
| Inlet water temperature | 5 ℃~40 ℃ |
| Workroom material | Stainless steel 304 |
| Working noise | The working noise of the automatic cleaning and disinfection machine shall not exceed 75dB (A) |
Leave your inquiry below. Best service in first time