TEL：(0086) 372 5577488
Steam Autoclave can be widely used in department of stomatology and ophthalmology, operating room and other medical institutions. It is suitable for all wrapped or unwrapped solid instrument, A-class cavity instrument (dental hand-pieces and endoscopes), implantable instrument, dressing fabric and rubber tubes, etc.
1.3-times pre-vacum, effective discharge cold air from chamber to improve steam efficiency.
2.Internal steam generator, PLC control ,space and energy saving .
3.The post-sterilization hot steam is cooled down before discharge from machine
4.Equipped with water quality monitor. extend the machine service life.
|Power Supply||AC 380V ,50Hz|
|Working Pressures||210kPa-230kPa (0.21-0.23MPa)|
|Safety Over-Pressure||1.Over-pressure warning alarmSafe pressure relief valveOver-temperature shut-off device|
|Safety Door Interlock||PLC set: the door can't open while vessel is under pressure; can't start up if the door is not properly closed|
|Safety Emergency Shut-off||In a readily accessible location|
|Safety Surfaces||Surfaces NOT exceeding 50°C|
|Door||Mechanical rotating locking with electronic sensor|
|Indicator For Temperature||± 1% accuracy over the scale range 50®C to 150°C; 0.1 °C resolution for digital display|
|Display Indicators||Door locked, operation in progress, major operating cycle stages, and cycle complete ,times,temperature, pressure ,fault condition readable by normal vision from a distance of 1.2 m|
|Manuals||English language.Operation instructions (including process description),Loading and maintenance procedures.Short-form of operation and loading procedures.|
|Spare Parts(option)||Heating elementDoor seal/gasketReplacement air filterSafety valvePressure and temperature gauges|